Plasma Powders & Systems Incorporated
FAQs   |   JOIN   |   ABOUT   |   BLOG   |  ORDER   
228 Boundary Road, PO Box 132
Marlboro, NJ 07746 

Phone 732-431-0992
Toll Free: 800-358-4287


Search: 


Plasma Powders, Thermal Spray Industry Youtube Channel

    HOME   |   SPRAY EQUIPMENT   |   HANDLING EQUIPMENT   |   POWDERS   |   WIRES  |   PARTS   |   TRAINING   |   TECHNOLOGY   |   CONTACT
Equipment
 9MB Type Machine Mount Plasma Spray Gun
 
9MB Type Machine Mount Plasma Spray Gun
The 9MB Plasma Spray Gun Machine Mount hardware was designed for versatile, safe and easy operation. When changing from one spray material or plasma gas to another, the switchover is fast – nozzles and electrodes are plugin/pullout assemblies. Water-cooled cables are attached to the bottom of the manual handheld gun to improve balance and prevent interference in close-up spraying applications.
 
 
 
 
 Plasma Spray Guns
 9MB Type Machine Mount Plasma Spray Gun

Plasma gun that is machine mounted. Requires a power supply, console, heat exchanger.

9MB Type Plasma Gun Machine Mount
Uses Pros  Used With
Used to spray tougher materials. Spray hard materials. Ceramics, tungston carbide.

The 9MB Type Plasma Spray Gun Machine Mount
hardware was designed for versatile, safe and easy operation. When changing from one spray material or plasma gas to another, the switchover is fast – nozzles and electrodes are plugin/pullout assemblies. Water-cooled cables are attached to the bottom of the manual handheld gun to improve balance and prevent interference in close-up spraying applications. Water cooled power cables for the gun have right– and left– hand thread design, making it impossible to cross connect them. Heavy plastic insulators are provided to protect the operator from electrical shock.

EQUIPMENT FEATURES:

  • High power capability – optimum performance at levels up to 80 kW
  • High heat output capabilities – plasma gas temperatures up to 16,000ΊC (28,880ΊF)
  • High plasma gas velocity – in excess of 3,050 m/s (10,000 ft./sec).
  • Dual Gas Capability – operates with either argon or nitrogen as the primary plasma gas.
  • High Particle velocities – up to 610 m/s(2,000 ft./sec.)
  • Nozzles designed with Thin Annular Passage Cooling (TAP) – precisely direct the cooling water for optimum heat transfer and even distribution within the hardware.
  • The design of the electrode allows for impinged water cooling to be directed into the critical tungsten tip area, resulting in improved electrode life.
  • Long life gas insulators – fabricated from heat resistant ceramics, ensure durability and uniform gas flow at high power levels.
  • Modular construction – permits the use of high performance hardware with both handheld and machine mount gun variations.
  • Adaptable with extensions – allows for internal diameter spraying (e.g., cylinder walls) or for spray applications in hard-to-reach areas.
  • Improved hardware accessibility – allows easy replacement and changeover of nozzles, electrodes
    and gas insulator assemblies.
  • High power levels – extended nozzle and electrode life.
  • Higher spray rates – shortens production time.
  • Advanced technology – broadens range of capabilities.
  • Ease of operation, maintenance, and installation – ideally suited for general purpose and advanced
    coating applications
  • Operates with – SCR-controlled power supply units
  • Historically proven nozzle design – offers economical replacement cost.
  • Fully operational with nitrogen as the primary fuel gas – economical operating parameters with high
    BTU output.
 
 
Plasma Powders & Systems Inc.
Thermal Spray Company
228 Boundary Road,
PO Box 132
Marlboro, NJ 07746

About Us

Phone: 732-431-0992
Toll Free: 800-358-4287

Thermal Spray Products Resources Contact Us
Copyright 2011-2017 Plasma Powders & Systems Inc. Disclaimer Website and Marketing by Cat's Meow Marketing

website design by NovaStar web design