PowderJet 85 Combustion Powder Spray Gun Our PowderJet 85 Powder Spray Gun, Metco 5PII equivalent, is engineered to provide an economical solution for spraying combustion powder coatings. The simple design and gun-mounted hopper provide an easy to use tool that produces high quality coatings, with very low maintenance.
Most commonly used in “Spray & Fuse”, quick or mobile applications. The attached hopper allows for a faster and more economical set-up when performing a job
Easy to use and maintain.
Cooling air jet and vibrator attachments.
Most combustion powders.
Powderjet-85 Combustion Powder Spray Gun is a thermal spraying gun used to deposit combustion thermal spray powders on to solid work surfaces. The powder to be sprayed is loaded in a hopper mounted on the gun, then fed by gravity through a metering valve into an aspirator chamber where it’s melted into fine particles and propelled by air towards the work surface. With this model, the deposit efficiency is very high meaning only a minute amount of the powder is lost by being blown away or consumed in the flame. Sprayed coatings are typically very dense and uniform.
The gun can be operated both manually as well as held in a tool post for automated production. The design of the gun is such that it can spray a wide variety of powders without changing the nozzle.
Available extensions: 1 ft,2 ft,3 ft extension, acetylene.
Air Jet assembly
Gun mounted powder vibrator
PPS Powderjet 85 Combustion Powder Spray Gun
* Metco, 5PII and 6PII are Sulzer Metco brands. Plasma Powders is in no way affiliated with Sulzer Metco or its subsidiaries.