Plasma Powders & Systems Incorporated
FAQs   |   JOIN   |   ABOUT   |   BLOG   |  ORDER   
228 Boundary Road, PO Box 132
Marlboro, NJ 07746 

Phone 732-431-0992
Toll Free: 800-358-4287


Search: 


Plasma Powders, Thermal Spray Industry Youtube Channel

    HOME   |   SPRAY EQUIPMENT   |   HANDLING EQUIPMENT   |   POWDERS   |   WIRES  |   PARTS   |   TRAINING   |   TECHNOLOGY   |   CONTACT
Equipment
  CORROSPRAY Wire Spray Gun
 
CORROSPRAY Wire Spray Gun
The CorroSpray Gun is an equivalent to the 11E Combustion Wire Spray Gun. This wire gun is engineered specifically for soft-wire applications. It runs at higher speeds with excellent coverage and is sought after for “Galvanizing” and other corrosion resistant coatings or Tin and Babbitt coatings. This is a very effective tool for coating or repairing various metals in severely corrosive environments. Our entire line of WireJet guns is perfect for hand-held, fixed or mobile applications.
 
 
 
 
 Combustion Wire Guns
 CorroSpray Wire Spray Gun

The CorroSpray Gun is a lightweight wire spray gun that uses an air turbine to draw wire in, melt it with fuel gas and blast the molten particles on to the substrate. This gun is convenient for hand-held or start/stop operation due to the Wire feed thumb trigger. This gun will not spray harder materials such as Stainless Steels, Nickel, Bronzes, Copper or Bondrite. See our brochure for more information.

Download Product Brochure and Video
CorroSpray Wire Spray Gun (PDF)

CorroSpray Metalizing Gun System components: 2GF Gas Flowmeter, 3AF Air Flowmeter, AT-100-3/8Air Trio, Heavy Duty Wirestand, wire gun Extensions, CorroSpray Combustion Wire Torch, System flow diagram

 

CORROSPRAY Wire Spray Gun
Uses Pros  Used With
A wire gun used to spray at high speeds ONLY. Its design allows for a smooth spray with soft materials. Soft wires: tin, babbit, aluminum. You can also use zinc, and zinc/aluminum.


CorroSpray Wire Spray Gun
The CORROSPRAY Gun is designed to run at higher speeds allowing the user to apply soft wire material to any substrate efficiently and economically. It can be used for smaller jobs as well as cranking out large area applications almost as easily as spray painting. It sprays 1/8” (3.17mm) and 3/16” (4.76mm) soft metalizing wires such as zinc, aluminum, lead, tin and Babbitt, with low melting points. Converting from one size of wire to another is quick and easy.

CORROSPRAY Wire Spray Gun Features:

  • An improved version of the Gun’s siphon jet gas head produces high spray rates, low gas consumption and extreme resistance to backfire and its effects.
  • Nozzle-to siphon plug seals are “O” Rings, instead of being lapped surfaces, which are difficult to maintain.
  • The gas head valve provides long service life with limited maintenance. Worn or damaged valve parts are easily replaced.
  • New-design nozzle and air caps provide excellent coatings at very high spraying speeds and without loading.
  • The nozzle, siphon plug and front wire guide assemble as a unit which can be quickly and easily removed and replaced, when changing wire size or servicing.
  • The CorroSpray Guns controlled power governor provides increased power and stability of wire speed.
  • The drive rolls and wire guides are made of hardened stainless steel for high resistance to wear and corrosion.
  • A thumb-operated wire grip control starts and stops the wire feed. It is conveniently located for ease of operation.
  • A simple, rugged wire snubber is incorporated in the wire from accidentally pulling out of the gun.

 

 
 
Plasma Powders & Systems Inc.
Thermal Spray Company
228 Boundary Road,
PO Box 132
Marlboro, NJ 07746

About Us

Phone: 732-431-0992
Toll Free: 800-358-4287

Thermal Spray Products Resources Contact Us
Copyright 2011-2017 Plasma Powders & Systems Inc. Disclaimer Website and Marketing by Cat's Meow Marketing

website design by NovaStar web design